Suunto 9 Peak (review and specs)

[Dimitrios Kanellopoulos]

@bulkan this will become better

[surfboomerang]

@inkognito Thanks anyway

[Bulkan]

@surfboomerang is the same data and course. But looks like it will be improve.

[isazi]

@bulkan yeah at the moment the alti profile on the Peak is a bit flattened, probably due to difference in screen size.

[Egika]

@surfboomerang said in Suunto 9 Peak (review and specs):

@dimitrios-kanellopoulos You’re right. Maybe it is interesting for downhill kayaking (or how is that sport called?)

White water kayaking. The problem there is you get a lot of water on the sensor, sometimes submerging it etc.
You still get a good idea of the altitude profile and that is the reason why it makes sense to keep altitude data for kayaking. This is the way it is

[Dimitrios Kanellopoulos]

@egika I have to check with the S9P sensor and water. To me it looks it works better as the sensor doesn’t get water stuck in

[isazi]

@egika yes, what I would do is similar to what already happens with other sports such as MTB, where you have different specializations. When choosing Kayaking I would like to have two profiles: flat water, white water.

[Egika]

@dimitrios-kanellopoulos the screenshot above is from S9 - i am happy with this given the challenging conditions
@isazi : good idea

[freeheeler]

@egika
for white water kayaking uphills could be filtered and maybe there’s a reasonable algorithm to detect submerging the watch: unless you take a huge waterfall drop, there’s no reason to suddenly rise the pressure.
Maybe it sounds a bit ignorant as rivers follow a certain topography and I bet some kayakers would like to record this, too… but what if only start and end alti is recorded and delta is the descent?

[Dimitrios Kanellopoulos]

@freeheeler said in Suunto 9 Peak (review and specs):

for white water kayaking uphills could be filtered and maybe there’s a reasonable algorithm to detect submerging the watch: unless you take a huge waterfall drop, there’s no reason to suddenly rise the pressure.

we do do that. But water sticks and influsences

[Dimitrios Kanellopoulos]

Last update and charge of the watch was 6 days exactly ago, the morning of 26th May.

• All on (24/7 tracking etc) except notifications. Standbylight always on, on adoptive mode. No raise to wake as it’s not needed for this config.
• White watchface
• 4h of GPS with Gallileo (consumes more than GPS only)
• 2 FW update on the 26th and 28th of the month (transfer FW via BT + install )
• Several checks on the watch and playing around for pics etc
• DND from 22pm to 8am
• Several pairings with SA due to development

I am now at 29% battery left

I suppose its good.

[dulko79]

@dimitrios-kanellopoulos how often does sensor check daily heart rate, every second or within certain time interval?

[Dimitrios Kanellopoulos]

@dulko79 some time interval not every second. I dont know the specifics but it should be around 5-10mins. It does have somewhat a cleverness there. Also it will change this a bit in the future.
But I dont think that OHR is the main drainage in battery on the s9P.

[dulko79]

@dimitrios-kanellopoulos cleverness, like if you are sitting still at the desk working, then you get up and start walking. Peak then changes sampling rate for hr based on movement?

[Dimitrios Kanellopoulos]

@dulko79 Unfortunately I dont know the specifics. What I do know is that atm there are a few features missing. For example “sensing” that the watch is not worn / tight (sensor skin contact). That should come asap.

[freeheeler]

@dimitrios-kanellopoulos
brilliant

[Mff73]

Question about OTA that comes to me :
If SA becomes the only way to upgrade S9P, and something went “wrong”, is there similar workaround like with Suuntolink drag’drop FW file?

[pilleus]

@dimitrios-kanellopoulos said in Suunto 9 Peak (review and specs):

I am now at 29% battery left

YOU should be at 100 %! Life is short and every moment matters …

[isazi]

@mff73 if something goes wrong while updating, the latest stable firmware that was on the watch is installed.

[Dimitrios Kanellopoulos]

@mff73 you always have the last FW in the watch to be able to revert.

You can actually reset the watch without SL