Is there anyy Official info how to move all data from Movescount to Suunto App?

freeheeler

@KnutB
what about your elevation graphs… do they have gaps?
And how far back did MC sync to Sports Tracker?
I tried that too and noticed it’s only going back to beginning 2018…

martin

@KnutB Sports Tracker won’t import all the data Movescount has, while the «automatic» MC to SA will, so it’s already been advised to avoid the MC > ST import… that said, you might just be fine with what data was pulled from MC to ST, in which case it’s all good for you !

Brad_Olwin

@TELE-HO Wait for the MC to SA sync. The data transferred is much more complete. I was able to get everything synced back to 2006:)

Brad_Olwin

@KnutB said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

@sartoric I know. But since all I had in MC is now coming over to the Suunto app, I am happy. Sync or not synced

The sync you enabled has elevation issues and some others if I recall.

@Dimitrios-Kanellopoulos doubt about this: I already done the import process to SA. On MC still showing me the messages:
“Movescount and device settings out of sync. Please synchronize your Suunto 9 Baro now!” or
“New software release 2.8.24.2220 available. Connect your Suunto 9 Baro with SuuntoLink to update.”

Have any sense keep my watch associated to MC?
I can safe remove the device from there, right?
THANKS!

Brad_Olwin

@flypg No reason to keep connected to MC but…Suuntolink is the only way to update the watch so disconnect the sync between Suuntolink and MC. Use Suuntolink to update your firmware.

@Brad_Olwin Thanks for the confirmation. Perfect.

zvonejan

Ok, can someone explain what is happening?. I had connected movescoutnt to sport tracks. All moves (at least trails) have manual laps. All that laps were visible in sport tracker WEB with correct data, also in sport tracker and android SA but with totally wrong pace.

Now, for test I disconnect movescount and I tried with SA. Because there are no analytics with SA I also connected SA with Runalize (wow what a perfect app. - everything is there and much more, better than good old Movescount, and better than Training peaks click on year shows year summary, click on month, shows all data month summarized….) And now the weird thing. I see all my 1990 moves from 2013 in SA, but only last 2 months were synchronized in Runalize (this is probably Runalize problem). And now the weird thing no.2. All NEW moves synchronized with SA have no manual laps, not in Sport tracker android not in SA, but have corrected laps in Runalize (WTF)……Ok . Now, according to Runalize instruction I backed up all moves from Movescount and I simply imported it (drag and drop for all moves) and all moves shows there in Runalize, off course with no manual laps (except new moves ). And here is my questions

All my 1990 tracks in SA have no manuals laps. What will happened with this? Will you provide recalculation tools for all that moves.

2 If you will provide such tools I will delete my all moves in runalize and try to perform import again. Off course, I have tu run recalculation tools in sa before that. I suggest all to use Runalize, because it is just perfect app. Works ONLY as web app ( mobile view on phone and desktop on PC).

I hope there will be no offense, but I do not understand your logic. Are developers coding with a bier in their hands and waiting for our responses. I am 100 % that there is no one which actually know exactly what is working and what is not. My corect DB is only in Movescount, and now I have to sync again my moves from SA (Sport tracker) to Movescoutnt with SyncMyTracks and yes, I know all my NEW moves will be imported as Running instead of TrailRunning and no manual laps (GRRRRRR!!!)! I am so tired of this exercise with data from one app to another.
Probably the best solution will be to provide autoimport (works for new moves) to Runalize and you can stop coding SA. In SA creating sport modes is there, sync is there, setting for notifications apps is there and thats is all we need. Oh yeah, creating a routes is there but no one who is serious is not using that (I know, Brat_Olwin, you are using it but face it it is too smal for all others 95 %)….I noticed that all my created routes is also in Sport Tracker WEB, but when I try to open I get error. Maybe to fix that and We have analysis on Web - Runalize, creating a route on Web - Sporttracker (I read somewhere that suunto bought Sport tracker) and sync with SA
I really, really, really miss Movescoun platform. So perfect, nice and all in one place. All analisys perfectly visible in Web app on desktop pc and on phone mobile view. If you disabled mobile view and set to hardcore view, you can even set sportmodes and create routes with heatmaps and few seconds after that sync with old mobile movescount app. Mobile app (movescout) is ultra simple, syncing only, and maybe movie for fun after long hike with friends. That is it. I belive you guys that old Movescount in not technically sustainable and that changing is necessary but not in this way. Last weeks I am only moving data from one to another app and hitting my head to the wall over and over again :(. things shoud be simple, but noo, I need to investigate where to get the information from which app instead of training and enjoying in nature
By the way. All 3 main players (Polar, Garmin, Suunto) have Web apps

zvonejan

…and yes, can you enable sync from SA to Movescount? I will not use any more sync method from Movescount to Sport-tracker ( and SA) because there are some differences. So in short, I would like to try SA sync, but all moves should should also be visible in my main DB Movescont. If that is not possible I am going on movescount again, what else should I do, damn……

zumale

Can’t find MS in SA in connect to other services.

I have a problem moving MS data to SA. I use spartan sport.
In SA in the connectivity section, there is no MS app to login and connect.
I created SA account with the same email and password as MS.
What do I need to do to get MS visible in SA to make a transfer?
MS and SA are still in my iPhone paired with watch.

Thanks!

avalanchesiqi

@Brad_Olwin

Do you have an estimated for the data transfer to happen for Ambit3? I have an Ambit3 but now upgrade to S9. The SA does not allow me to pair 2 watches at the same time so I have to keep an eye for the data transfer for Ambit3 to happen.

Don’t want to lose all my 5 years MC data…

BKtoo

@avalanchesiqi I conected MC to Sportstracker (3rd part) and after one week all my data (picture and so on) was in the Suunto app.

freeheeler

@KnutB
what quality are your altitude graphs in SA after this transition?

Mff73

@KnutB

Good question from
@TELE-HO said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

@KnutB
what quality are your altitude graphs in SA after this transition?

MC–>Sporttrackers is not known to give correct datas (at least for altitude ones (ascent, descent, etc…)
You have all your moves, but with which quality

freeheeler

@Mff73
I have done this couple of weeks, too… all transitioned altitude graphs are spikey…
Maybe I get a second chance before I transfer MC to SA the official way… I will then delete all SA activities (maybe need to create a new account?!) and the sync all MC data to SA in a good quality.

I think instruction from Suunto will come along with an announcement how to proceed in which user cases, because there are several cases!

Mff73

@TELE-HO said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

@Mff73
I have done this couple of weeks, too… all transitioned altitude graphs are spikey…
Maybe I get a second chance before I transfer MC to SA the official way… I will then delete all SA activities (maybe need to create a new account?!) and the sync all MC data to SA in a good quality.

I think instruction from Suunto will come along with an announcement how to proceed in which user cases, because there are several cases!

I am waiting to do it like that as well
When available, new SA account, and MC mass transfer

Brad_Olwin

@avalanchesiqi said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

@Brad_Olwin

Do you have an estimated for the data transfer to happen for Ambit3? I have an Ambit3 but now upgrade to S9. The SA does not allow me to pair 2 watches at the same time so I have to keep an eye for the data transfer for Ambit3 to happen.

Don’t want to lose all my 5 years MC data…

You won’t lose any data. The Tags and routes will not transfer but you can download the routes. For two watches, here is what I do. Sync with SA, then forget the watch you synced in the app (Not in BT stack, only the app), then pair the 2nd watch and sync with SA. I switch watches often this way. All the fitness and exercises will transfer to the app.

SHIPPERS

@zumale said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

Can’t find MS in SA in connect to other services.

I have a problem moving MS data to SA. I use spartan sport.
In SA in the connectivity section, there is no MS app to login and connect.
I created SA account with the same email and password as MS.
What do I need to do to get MS visible in SA to make a transfer?
MS and SA are still in my iPhone paired with watch.

Thanks!

I am in the same situation, I dont have the option to connect to movescount from SA to transfer my old data

iPhone, have both installed but watch forgotten from movescount. ( I have deleted movescount and the option still does not appear so have put it back).

Brent Rodriguez

@Brad_Olwin

The Tags and routs will not transfer…

So it seems tags aren’t going to make it into Suunto app. Bummer.

Brad_Olwin

@Brent-Rodriguez said in Is there anyy Official info how to move all data from Movescount to Suunto App?:

@Brad_Olwin

The Tags and routs will not transfer…

So it seems tags aren’t going to make it into Suunto app. Bummer.

Big bummer for me too as this is how I locate moves and compare to prior years. If you have iOS you can use the same tags in the comment fields and start over. The search works for them.