Mandatory Gas Time Alarm at beginning of the dive
-
@MartinPadiPro @voigas Again I had the mandatory gas time alarm in the beginning of the dive. See included screenshots.
I had some initial issues getting the pressure on the display but that can be something that is non related… the tank was pressurized, i saw the pressure, but before my backroll I needed to check as pressure was “–”. But before he tank showed “201”. I’ve send the logs and an update of this case to Suunto support hoping they can find out what this causes. It is always during ascent and ofcourse correctly activated after a dive indicating the 5 Min alarm as is is supposed to do.
-
@hhouter damn. I got a email from Suunto with standard answers. Check tank check pod i all did that. It is a wide problem under more Nautic users. Monday i go diving again if the problem is coming back i go send the data to Suunto and let you guys know
-
MartinPadiPro said:
@hhouter damn. I got a email from Suunto with standard answers. Check tank check pod i all did that. It is a wide problem under more Nautic users. Monday i go diving again if the problem is coming back i go send the data to Suunto and let you guys know
Dear Martin,
Thank you for contacting Suunto Support and for sharing the detailed information about the issue you experienced during your dives.
We understand your concern, especially when the dive computer shows a low gas alarm despite having sufficient tank pressure. We will be happy to help you investigate this further.
When a Suunto dive computer triggers an unexpected low gas alarm or the Gas Time value resets despite having enough tank pressure, it is usually related to one of the following factors:
- Tank Size Configuration
Gas time is calculated dynamically based on your current depth, tank pressure, and breathing rate (Surface Air Consumption / SAC).
Please check:
Go to Gases > Edit Gas
Confirm that the Tank Size (Volume) is correctly configured
If the tank size is incorrect or missing, the gas time calculation may become inaccurate.
- Initial SAC Calculation Phase
During the first 5–10 minutes of a dive, the algorithm calculates your breathing rate. A higher breathing rate or sudden depth changes during descent may temporarily reduce the estimated gas time, which can trigger an alarm before the calculation stabilizes.
- Gas Time / Pressure Alarm Settings
Please verify your alarm settings:
Go to Dive Settings > Alarms
Check your configured pressure and remaining gas time alarm thresholds
The default mandatory tank pressure alarm is set to 50 bar, but custom alarm values may affect when notifications appear.
- Temporary Tank POD Signal Reconnection
If the wireless connection between the Tank POD and dive computer is interrupted temporarily, the pressure reading may briefly disappear and then update once the connection is restored. This recalculation can appear as a sudden reset of the Gas Time value.
Before your next dive, we recommend checking the following:
Connect both dive computers to the Suunto App and ensure they have the latest firmware installed.
Confirm the Tank POD is correctly paired and the pressure reading matches your mechanical pressure gauge before entering the water.
Ensure the Tank POD battery and connection are functioning correctly.
As a standard safety precaution, please continue relying on your mechanical pressure gauge if any wireless pressure readings appear inconsistent.
After your next dive, if the issue occurs again, please sync both devices with the Suunto App and provide us with:
Dive computer model(s)
Firmware version(s)
Approximate dive time when the alarm occurred
Any screenshots or dive logs available
We will review the information and assist you further.
Thank you for your cooperation.
Best regards,
Zack
Suunto Support Team -
https://photos.app.goo.gl/1o43GWsetjia3SfN9
https://photos.app.goo.gl/zhhZfuxBsEteLWo1A
This are mine screenshots
-
During the first 5–10 minutes of a dive, the algorithm calculates your breathing rate. A higher breathing rate or sudden depth changes during descent may temporarily reduce the estimated gas time, which can trigger an alarm before the calculation stabilizes.
Interesting… but that is the issue with the full tank and in descent, this alarm in the beginning of the dive should never pop-up.
I have also submitted them the logs and model / Serial numbers etc… but didn’t hear back from them yet. The alarm in my last dive at 6m was not scary… the one I got at 33 meter was !!! I simply hope that I never get an alarm in the beginning of a dive which is relevant because now treat them all as irrelevant.
-
@MartinPadiPro I have two buddies who also have a Nautic. This issue was seen by both, but they don’t bother to submit to Suunto. So it is definitively not a standalone problem…
-
@MartinPadiPro Sounds like a bot, all those answers don’t make sense for the described situation. I hope Suunto is taking that case serious, after algorithm lock and depth sensor failures it could be the next fiasco pushing customers to Garmin or Shearwater.
Thats a shame, when I started diving the question was just which Suunto to choose as a dive computer. Everyone had Cobras, Vypers and then Zoops, but it had to be a Suunto -
@VoiGAS On my first dives with the Nautic I was wearing my EON Core on my other arm to compare RGBM vs buhlman. So the first dives and my first Mandatory Gas’s Time Alarm were recorded with two Suunto dive computers on one POD. The Core was flawless and didn’t have any interruptions, but the Nautic gave the error. This is why I think there is a bug in the algorithm calculation of the Nautic.Due to the fact this was my first Mandator Gas Time Alarm, I ascended immediately after the alarm. Both logs were sent to Suunto support. See both logs, below:
-
@hhouter little bit offtopic, but I am really interested in your experience with the two algorithms. Maybe you like to share them here: https://forum.suunto.com/topic/15559/bühlmann-vs.-rgbm/10
-
@VoiGAS Yes, will respond with my findings there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login