Software Update 2.48.16 (2025 November Rain release)

Josaiplu

@Egika there is so much stuff that happen while I innocently running with my watch

jjpaz

@Dimitrios-Kanellopoulos Yes, the “ghost” bip/buzz when you power on a BT sensor is still there. Battery drain also, because it seems that BT process continues searching for BT devices as in the previous sw version.
Verified (and easily reproducible) in my Suunto Vertical.

jjpaz

@thanasis According to my tests (also performed with the previous software) th BT connection process keeps searching for devices after finishing activities. I can reproduce the behavior just powering on my Heart rate sensor (Coospo), the watch bips and buzzes when connects to the sensor, in the watchface screen outside activities.
If you soft reset the watch, BT connection process is restarted and doesn´t search for devices until you start another activity.
In my case this is causing a 12-14% battery drain by day outside activities (Vertical Solar Ti).
I sent logs to Suunto.

duffman19

Just want to confirm that I’m also still experiencing the same battery behavior as @jjpaz above with no improvements over the previous software. Still have random ghost notifications (buzzes) outside of activities that seem to be BT related and random high battery consumption. Some days are good with normal battery drain, while others have significant drops, up to 10-15% overnight. This is for both 9PP and V1.

Sergey Balbir

@Matúš said in Software Update 2.48.16 (2025 November Rain release):

Last Tuesday morning I’ve updated my 9PP to this firmware: during the evening, reached a battery level between 10-20%, I fully recharged the watch.

Today (now), after almost 7 days, the battery level is 64%.

From firmware 2.40.44, the last one stable and used on my watch, to 2.48.16 I’ve not changed anything in my routine and device use: actually, with 2.40.44, a 100% battery lasted more or less 8-10 days.

I will continue monitoring the battery discharge, to 10-20% and for the next battery cycles, but, at the moment, firmware 2.48.16 (for me) it’s doing its work.

For me it behaves like you describe but only until I have any sport mode activated.
Then nothing can stop the drain out of the battery.
3-4 days on 9pp. Factory reset or soft reset didn’t help.

Gideon Kaempfer

@Egika very interesting! I wasn’t aware that it’s become that sophisticated. I’m still using flashlights that report voltage levels

SuperFlo75

@jjpaz I have the same problem with SV and Suunto smart belt as I posted yesterday… these beeps appear several uncountable times during training and also after training… yesterday it seemed that the belt won’t disconnect after activity

segi_pn

@Horizontal_2 I’m interested in seeing some of your new graphs.
How did you make the graph? Which software do you use? Maybe I’ll try taking my own measurements with my Suunto Vertical.

Horizontal_2

@segi_pn I’ll update in a day or two. I’m trying to turn on the Flight mode for the night, maybe longer. Just to see if the drain comes from connectivity. The graph of previous cycle was more exciting because sometimes it did get the 5% per day easily

It’s just Excel. Everytime I see the battery drop 1% I note the time in my phone. One or two times per day I update the sheet and voilla. Sometimes I skip a percentage

Squirrel

@Horizontal_2 said in Software Update 2.48.16 (2025 November Rain release):

I’m trying to turn on the Flight mode for the night, maybe longer.

Make sure you enable flight mode from Settings, not from Control panel. Don’t know if the bug is still there with current firmware, but Airplane mode toggle in Control panel would not disable Bluetooth. 🤨

gone troppo

I have tried putting aeroplane mode on from the settings whilst at work, battery drain continues no different to if aeroplane mode is not on, approx 1% every 2 hours on average sitting around.

misu763

@Matúš
The same attitude for my 9PP after the latest update. Charged last Monday evening, then I updated the firmware and today is 42%…it seems the watch is back to the native performances!
Let’s see how this is going in the future cycles!

jjpaz

@SuperFlo75 Do you have a ‘ghost sensors’ list in your list of linked sensors? Yesterday I trained with my Race S instead of the Vertical (also with the Coospo armband) and battery drain seems correct and watch doesn´t buzz when I power on the sensor after activities.

Difference between two watches? Race S doesn’t have ‘ghost sensors’, Vertical has 3 or 4 ghost sensors in the sensors list.

Yesterday morning also I charged Vertical, 100% battery, soft reset the watch and keep it in the table (I trained and slept with Race S) . Now battery is still 100% full battery.

SuperFlo75

@jjpaz I don’t have the problem with ghost sensors…

Matúš

@Sergey-Balbir said in Software Update 2.48.16 (2025 November Rain release):

@Matúš said in Software Update 2.48.16 (2025 November Rain release):

Last Tuesday morning I’ve updated my 9PP to this firmware: during the evening, reached a battery level between 10-20%, I fully recharged the watch.

Today (now), after almost 7 days, the battery level is 64%.

From firmware 2.40.44, the last one stable and used on my watch, to 2.48.16 I’ve not changed anything in my routine and device use: actually, with 2.40.44, a 100% battery lasted more or less 8-10 days.

I will continue monitoring the battery discharge, to 10-20% and for the next battery cycles, but, at the moment, firmware 2.48.16 (for me) it’s doing its work.

For me it behaves like you describe but only until I have any sport mode activated.
Then nothing can stop the drain out of the battery.
3-4 days on 9pp.

As reference, I always use standard sport modes, with battery sets in “Performance” and HR belt.

GuillaumeA

For your information, I also own the Vertical 1, Race 2 and Run. I use all three regularly and switch between them depending on the sessions and races I’m doing. I have to say one thing, though: the battery life of the Run is pretty impressive. With the battery issues of the V2.XX.XX, it lasts almost as long as the battery of my Race 2, which itself lasts longer than the battery of my Vertical 1.

The Run is V3.XX.XX, which makes it seem even more like there’s a software bug lurking somewhere… Another significant issue with the latest Suunto updates is that some of the bugs described as ‘fixed’ are not actually fixed at all: notably the recovery widget, which is still not synchronised (it is on the Run), and the battery drain (which is undoubtedly the most annoying).

Dušan Ković

Something is definitely not right with battery drain. I’ve updated it when FW was released, I did one full charge/discharge cycle. Last night I charged it to 100% and removed the watch from charger at 23:00, when I went to sleep. Watch was on my hand for sleep tracking, etc. Right now 11.5 hours later I have 94% of battery, that is 6% over night only for sleep tracking, no activity today.

EDIT: before this FW version, battery drain was normal, battery life was about two weeks with activity

OutdoorMan

@OutdoorMan said in Software Update 2.48.16 (2025 November Rain release):

I am happy to see that all data from watch is now in sync with the app. Resources, recovery and hrv range now all match. Also when the hrv range changes it is reflected in the app. Very happy about it. But will still keep an eye on it, on resources especially : )

Well, I have to correct my statement a bit. Recovery is out of sync again. Strangely enough it matched for a few days … this is weird.

thanasis

@GuillaumeA said in Software Update 2.48.16 (2025 November Rain release):

[…with the latest Suunto updates is that some of the bugs described as ‘fixed’ are not actually fixed at all…]g).

that’s really annoying. Fixed , but not fixed and “fixed” without any explanation or follow up. Of course this is just a user forum and Suunto does not bear any liability , but this is the reality

Alpha 156.42

After updating my ZoneSense software, I noticed that the color bars don’t match my breathing sensation. Has anyone else had this problem and is there a way to fix it?