Software Update 2.48.16 (2025 November Rain release)

Mads Hintz-Madsen

@Stefan-Kersting said in Software Update 2.48.16 (2025 November Rain release):

@Mads-Hintz-Madsen did you try a factory reset? I have the same trouble but before doing a factory reset and loose all my setting I want to ensure that it works and the the factory reset isn t wastet.

On the previous SW, I did a factory reset and that did naturally remove the ghost sensors as it is a complete reset of the watch.

However, the ghost sensors came back again after some time. So, on the previous SW, this wasn’t a sustainable way to get rid of ghost sensors.

I have also tried re-installing the same SW as is currently on the watch in the hope that this would remove the ghost sensors without having to reconfigure the watch (and wait for the watch to relearn your HRV range). However, this just turned all my existing paired sensors into ghost sensors so the problem got worse.

Only thing I haven’t tried is to factor reset the watch with this new SW and check if the ghost sensor problem would be fully solved. My expectation is that this would not solve the problem as there is no mention of improvements of the multiple sensor support in the change log.

dulko79

Sleep tracking went well. New morning report showed up, data are presented in a nice way.

Milan Šádek

@pavel.samokha there is one more undocumented bug fix - thank you for addressing the alarm clock issue - tested last midnight and it was finally triggered!
https://forum.suunto.com/post/166987

Stefan Kersting

@Mads-Hintz-Madsen which sensors are you using? I can identify my stryd sensor as ghost sensor. Actually is this sensor four times on my watch. The HR chest belt seems to work. I can connect disconect it and the HR chest belt is identified correct. I think these multiple sensor feature fucked it all up

The Lost Alien

Hello everyone.

I updated my SR device last night, and everything is working fine. It used 4% of the battery. It was 2% on version 2.43.12.

I downgraded to version 2.43.12 because of the various sensor issues I was experiencing in recent updates. I’ll be testing the heart rate band and my bike cadence sensor during my next workout to see how it works. I hope the sensors work well with the new update so I don’t have to revert back to the old version.

Jan Van de Velde

@dulko79 Same here. Nice improvement.

VoiGAS

All my zones and custom sports are still here - but the update turned on the Feelings for all sport modes - now I have to disable all again
Please Suunto make them at least configurable for ALL sport modes in one place!

misu763

@dulko79
The same here! No issues (for now) and nice morning welcome!
Do you think this could be considered as major update requiring a complete watch battery discharge?

Dimitrios Kanellopoulos

@Stefan-Kersting

Hi , I see you are a little bit overwhelming here with the posts. Lets take things 1 by 1.

No need to rollback
If need to clean the silly list with the ghost sensors then hard reset unfortunately. But Afaik it wont come back ghostly again.
After an update its usual to not be able to correctly within a few hours expect a normal battery “monitoring”. Run it though the days and see how ti performs.

I am more interested though in your statement about the beeps you have during time mode. are they from sensors ?

Mads Hintz-Madsen

@Dimitrios-Kanellopoulos said in Software Update 2.48.16 (2025 November Rain release):

If need to clean the silly list with the ghost sensors then hard reset unfortunately. But Afaik it wont come back ghostly again.

What do you base this statement on? Has there been some update regarding ghost sensors in the latest SW?

I am asking because on the previous SW, I did a hard reset which removed the ghost sensors but they came back. So on the previous SW, a hard reset was not a permanent solution. If it indeed would be a permanent solution with the new SW, then I would do a hard reset. That is why I would like to know if you actually have some facts on this backing up your “AFAIK statement”?

maszop

@pavel.samokha Is this a Q4 update or just an additional bugfixes update?

Stefan Kersting

@Dimitrios-Kanellopoulos two hours ago I did a factory reset so I gonna see now. Concerning the beeps I don’t really know where they came from. Had disabled notifications and no other alarms activated. Could not be the sun set/sun rise alarm. When enabled the flight mode there was no beeping any more. I had just connectet med H10 sensor and four stride ghost sensors. I use to unclip the H10 sensor from the belt when not using it during activities. The watch never displayed anything when beeping and it beeped several times an hour.

Dimitrios Kanellopoulos

@maszop no q4 , just bugfix

maszop

@Dimitrios-Kanellopoulos Great, because it would look too modest for a Q4.

Tieutieu

First run after update this morning with SRs : even if smartsensor was still appaired, and detected in start screen of exercice, obviously ohr was used when I started the exercice (very high values). I unpaired it, appaired it again, and start exercise => then ok .

Danny poleg

I would really appreciate it if someone could expand a bit on the things that were added in the last update and if possible with pictures
I am in a period where I am less physically active but I am still interested - I would also like pictures if anyone can
Thank you

Tami999

Sadly no morning report after yesterdays update.
I slept 8:12, and wanted to check new summary, but no report. I went to ,Sleep" widget to force summary but it wont show up sadly… I’ll check if tommorow will work.

Egika

@SuuntoR said in Software Update 2.48.16 (2025 November Rain release):

On reddit there was a change log including also “flashlight setting reminder in activity” (vertical 2). Any idea what this is?

You can try, if the flashlight is starting at the same setting where you exited it the last time.
The hint seems to indicate that it is currently implemented only during activity.

Egika

@VoiGAS said in Software Update 2.48.16 (2025 November Rain release):

@Stefan-Kersting There are not really fancy new features in this update, only the merge of the two software streams and bug fixes.
So I guess they focused on the bugs this time. But as it seems unfortunately with limited sucess

plus there is the GCT and vertical oscillation introduced. But maybe not fancy enough…

maszop

@Egika Is it a hardware limitations that this isn’t included in the update for older models?
Or is it just a marketing decision not to add new features to older models?