Shimano Di2
-
@seanvk you can pair HR, speed/cadence (1 unit) and power on Suunto watches
Vector/T6c/Ambit 3 Peak/S5 Copper/S3/S7 Ti/S9 baro Ti/S9P Ti/S9PP Ti/Vertical Ti/Race Ti/RaceS/Ocean/Wing
-
@Brad_Olwin my question was the number of devices total that you can pair at one time. Thanks!
-
@seanvk That was my answer!
-
@Brad_Olwin said in Shimano Di2:
That was my answer!
Could you be a bit more specific? So only 3 simultaneous Bluetooth connections are supported? Or is it 4 now that there is Di2 support?
-
@zucchero so I tried the Di2 S+ App today.
I’m using Ultegra 12-speed Di2 groupset and I did get it to work.
First I tried to put the Di2 system into discovery mode as you did. And similar to you then the S+ app on the watch could not find the Di2 system.
I then “woke” up the Di2 system by doing some shifting and then tried the S+ app again and this time the S+ app found the Di2 system. I’m still not sure what is the correct way to make the connection.
Funnily enough after the ride (130km, 5h 40min), the watch synchronized with the Suunto App right away. I haven’t been able to get syncing working right away for many weeks since the infamous sync bug was introduced. But this is probably just a coincidence.
There seems to be a bug either in the Di2 S+ app or in the Suunto App when displaying the information.
Below are two images from the Suunto App showing the front derailleur shifting and the rear derailleur shifting overlaid on the altitude.
After around 3 hours, the shifting information seems to stop.
Will I be using this S+ app? No, there are no statistics in the Suunto App regarding the gear usage which was what I was expecting (I already have real-time Di2 gear info on my cycling computer).
About the bug: Maybe something @Raimo-Järvi could have a look at?
-
I could pair my Ultegra 12 Gear Di2 by just doing some shifting before starting the S+ App.
I think that is sufficient. No need to put the rear derailleur into pairing mode or anything like that. -
@Stoke80 in that case, we better stay away from other Di2 users when doing the “dumb” pairing if we don’t want to accidentally monitor someone else’s Di2
-
Right. Didn’t think about that one.
-
@Brad_Olwin did that successfully on my Race with Sram Power meter and Polar HR strap - no issues
-
@Mads-Hintz-Madsen said in Shimano Di2:
@Brad_Olwin said in Shimano Di2:
That was my answer!
Could you be a bit more specific? So only 3 simultaneous Bluetooth connections are supported? Or is it 4 now that there is Di2 support?
I believe the Di2 support is in SuuntoPlus so a bit different than counting BT connections. You can connect an HR strap, Power meter and Speed/cadence combined in the watch. Then Di2 in the Plus app. You cannot connect 2 HR straps or 2 speed/cadence or 2 power meters so just counting BT connections is not appropriate.
-
@Mads-Hintz-Madsen Yes, definitely something for me to have a look at
Thank you for the report.Did you notice if watch was showing gears or other Di2 information after 3 hours? Most probably problem was in the SuuntoPlus app or in the connection with Di2. Maybe Di2 was disconnected from watch for some reason, and connection was not restored. Sending logs from Suunto app might have been useful, but it’s probably too late in this case.
-
@Raimo-Järvi said in Shimano Di2:
Did you notice if watch was showing gears or other Di2 information after 3 hours?
I didn’t check the Di2 info on the watch during the ride. In fact, I never check my watch while riding as I have all the info I need on my cycling computer. I only use the watch during a ride for the fitness tracking.
I had the Di2 S+ app activated yesterday on another ride as well. This time the Suunto App only shows gear info for the first 1.5h (of a 5h ride).
Actually, I’m now wondering if the Di2-to-watch connection automatically is restored after the watch has been out of range from the Di2, e.g., for a coffee stop? Or does one have to manually reconnect the watch to the Di2? I wonder if that is what has happened?!
Edit: I sent logs to Suunto and messaged you with the details.
-
@Mads-Hintz-Madsen Connection should be restored automatically after watch has been out of range. I tested it, and reconnection works for me. I’ll need to test more, and also check if problem could be in Suunto app side when showing the gear data.
Regarding discovery mode, I can connect to my Di2 also in discovery mode, I’m not sure why it doesn’t work in some cases. We’ll have to update our instructions about connecting to Di2.
And thanks for the logs, but looks like watch logs from the time of your workout were already lost.
-
@Raimo-Järvi said in Shimano Di2:
And thanks for the logs, but looks like watch logs from the time of your workout were already lost.
Got it. I’ll use the Di2 app on my next ride as well and upload logs if same thing happens.
-
I tried to connect my 11-speed Ultegra Di2 and my 11-speed XT Di2 now three times without success. Looks like it does currently only work with 12-speed Di2.
-
@zucchero I don’t know why 11 speed Di2 would work differently. We have updated SuuntoPlus Di2 app, you could try if it works any better with 11 speed Di2 now. If it still doesn’t work, sending logs from Suunto app would be useful.
Pragmatic Programmer
-
Apparently many 11 speed Di2 devices are not supported, I will try to get more specific information about supported devices.
-
@Raimo-Järvi I tried again and we are one step further. I can connect with 11-speed XT & Ultegra Di2, but I do not get data on my Race (see picture). I’m I now official Tester for Suunto?
Regarding the logs, I’m not aware how to send log from the Suunto app!?
IMG_1079.jpg -
@zucchero go to Settings, scroll down until you find a “Send logs to Suunto” button
-
Looks like the issue is fixed now. After connecting with my 11-speed Di2 I can see the current gear on my Race.
I’m just wondering why I had to re-install the SUUNTOPLUS Shimano Di2 App to make it work.
I thought SUUNTOPLUS apps are updated with every sync of the Race with the Suunto App?
