Sync does not work since last software update (2.33.12)

Stefano M64

Let it rest for 1 or 2 hour after doing so and then try pairing it.

that’s the weirdest informatic “procedure” I’ve ever heard

tellierb

Also I noticed that my watch is significantly slower and lagging a lot compared to before the update.

I haven’t found a solution to intall an older firmware. If there is a way please advice.

If not, I think it is in important feature to avoid the problem with not functional latest firmware.

Mats Djupsjöbacka

@SteM64 said in Sync does not work since last software update (2.33.12):

Let it rest for 1 or 2 hour after doing so and then try pairing it.

that’s the weirdest informatic “procedure” I’ve ever heard

They probably forgot to mention that we also should put our watches on the floor and walk in circles around it singing a magic chant, and preferably it should be done at night during the full moon

pilleus

@Mats-Djupsjöbacka

Watches are very individual and have their own personal characteristics and peculiarities. Every watch is different …

shanghai-on-sea

I had this issue on 30 March, a few days after the update.

Activity was a 40km, 9.5hr hike. It refused to sync.

After numerous soft resets, disconnecting the watch from the app, uninstalling of the app, reinstalling the app, and staring into oblivion pondering my existence and its dependence on technology, it finally synced.

Frustrating but it seems to be fine since.

ChrisA

@NeilCoxon said in Sync does not work since last software update (2.33.12):

This seems, to me, to be an issue with bluetooth not maintaining the connection for long enough. Hence some small activities will eventually sync but not longer ones as the connection does not continue for a long enough time.

I think that’s true - After installing latest Beta on Android, my bike ride (1:50h) won’t sync today for the first time ever. Turning off BT, starting Suunto app, closing Suunto app, turning on BT again, starting Suunto app again did the trick, syncing the workout instantly.

Stefano M64

Yesterday, I made a short walk just for testing the sync problem. I tried several times to sync the watch with no luck. At the end I was able to sync the activity by let the SA to turn on the bluetooth from inside the program, that is:
check that BT is off
open the SA app
tap on the watch icon
then a message asks to turn on the bluetooth
I tapped the blue message bar on the bottom
then tapped allow to the following message from OS.
The sync performed seamlessly. Will try again in the afternoon after coming back form the gym.

Stefan B

I have the same problem. iPhone 11. Suunto Race bought it in november. Latest update. Never had the problem before. Started the last few days. What works for me is to restart the watch. Just did with a 60 km bike ride. Very annoying though.

tellierb

On my side, I had the issue and just waiting for an update from the dev team.

But yesterday without doing anything, it sudently synchronize my activities from the last week

Really strange behavior…

Charles

@tellierb Lucky you !!

Stefano M64

@SteM64 said in Sync does not work since last software update (2.33.12):

The sync performed seamlessly. Will try again in the afternoon after coming back form the gym.

Nope, I did a simple aerobic workout, no GPS, and the above mentioned procedure didn’t work
I just let the SA trying and after dinner I found the activity synchronized …

satom

It has been almost 2 weeks since I posted this problem and nothing has happened since. I have tried syncing the watch with several different devices running different operating systems. Lastly I tried Android but got the same result as with the iPhone. The app tries to sync but fails and disconnects after a few seconds. The fact that the Android app shows the same result as the iPhone app suggests that something is wrong with the firmware.

I like Suunto very much, but I do not need to describe how annoying this is. Especially the lack of official information from Suunto. If anyone has any information, please let me know. As far as I can see, the same problem has also been discussed in the Vertical thread, but without a solution.

sartoric

@satom

@Dimitrios-Kanellopoulos said in Sync does not work since last software update (2.33.12):

@tellierb issue is being looked at I assure you guys

Igor Uvalin

@satom
Hi, i have the same problem…
it just won’t connect to the app when i’m done training…android version 13

satom

@Igor-Uvalin Yes, this is a problem that affects many users. Not only the Race, but also the Vertical model has the same issue. It looks like a pretty big problem and I’m surprised that Suunto hasn’t acknowledged it and come up with a solution already.

sartoric

@sartoric said in Sync does not work since last software update (2.33.12):

@satom

@Dimitrios-Kanellopoulos said in Sync does not work since last software update (2.33.12):

@tellierb issue is being looked at I assure you guys

@satom
Let me quote the quote, again

Suunto has acknowledge it

Did they found the causes ? Probably not fully, yet, as mentioned in other threads

ODo67

Hello. I haven’t had my Race for very long, so I’ve had one update and one patch. Everyone has their own uses, so this is a very personal opinion, but… each update has brought its share of bugs without any particular improvement (note that for MY uses, I’m not generalising).
This is for me:

update, problem with screen visibility during a trail (problem not present before)
Last fix: I have to stop and restart my watch every morning so that it connects to my iPhone. Problem not previously present.
I admit that these two major problems (for me) are starting to worry me. I’m almost afraid of the next update (no malicious irony in that, just a fact). But let’s be optimistic, I’m sure the teams are doing their best.

@ODo67 Personally, I have paused with Suunto until all these hiccups are finally fixed.

Dimitrios Kanellopoulos

A couple of users have reported cases were restarts of app or watch repairs have have helped. Due to that our data is a bit buggered.

Is there any person here that cannot get his watch to sync no way ? And persistently? For all activities?

satom

@Dimitrios-Kanellopoulos
Hello there

It is more then three weeks now since I first experienced and after that reported this issue and nothing has changed since then. I’m still unable to sync any of my activities with the phone (18) in all that time, so I’ve stopped tracking any new activities until this issue is resolved.

I have posted a few messages on the forum and also offered my help in finding a bug a few times, but my offers have been ignored.
For example here: https://forum.suunto.com/post/143271

As I have written a couple of times, I like Suunto but this is very annoying. I’m not losing hope that someone will take this issue seriously and finally solve this problem.
I would be very very disappointed if I had to lose all 3 weeks of activities.

With that in mind, I will take this chance in good hope and try again to describe the problem in detail. Here is the step-by-step description of what I just tried:

I restarted the clock.
I paired the watch with the iPhone 14Pro; this worked fine.
The app started the sync process and displayed “PREPARE SYNC”.
Then the progress bar started and the app displayed “SYNCING 1/18”.
The progress bar stops and the application displays the error message “Activities did not sync”. At the same time, the application starts synchronising the next activity with the message “SYNCING 2/18”.
Repeat steps 4 and 5 for every 18 activities.
The application then displays the message “LAST SYNC FAILED” with the yellow exclamation mark.
A few seconds later, the application will start synchronising again, but this time with the message “SYNCING Optimising GPS”.
The application will then display the same screen as in step 7.
Then the application starts synchronising activities again and fails again.
Finally, the app disconnects from the watch and displays “NOT CONNECTED”.

The screenshots that illustrate the above steps are attached to the post.

This is the most typical behaviour that the app shows in my use, but from time to time the process breaks earlier and the watch remains disconnected until it is repaired. I also tried to sync the watch with different devices - iPhone, iPad and an Android phone and different OS versions, but each of these devices showed the same result - the sync always breaks at some point.

No sleep, HR and other data has been synchronised for this time either.
I sent my logs to Suunto at 13:40 CEST(UTC+2) today.

My SR is running with FW 2.33.12.
I was also unable to update the watch to the latest version 2.33.14 because the sync does not work and prohibits any attempt to download and update the FW. I also tried syncing the watch with the latest beta app (2.34.0 14847) from TF but that didn’t help either.

Finally, I would like to repeat my offer to help in any way possible to solve this problem, including active debugging of the watch/app, if you can provide me with some basic background instructions.

I hope this helps. If you have any questions, please feel free to contact me.