Suunto 9 Peak

surfboomerang

@isazi I agree. Last selected would be better.

@andré-faria swipe to go back to the watch face.

@дима-мельниченко said in Suunto 9 Peak:

@andré-faria you could hold down the middle button to quickly return to main screen.

Thank you guys, I didn’t know of this tricks.
Although they solved the “issue”, I think it would be more natural to just continue moving the menu (and maybe less complicated to implement).

Dimitrios Kanellopoulos

@andré-faria long hold the menu to go back from some places as well

lexterm77

I set intervals 12x(30s int + 15s rec) it is same problem as baro, when you finish interval and reset and press start again it stays at start interval screen until first interval expires. Not that is a big bug but sort of annoying.

isazi

@lexterm77 using Suunto+ also?

lexterm77

@isazi said in Suunto 9 Peak:

@lexterm77 using Suunto+ also?

S Plus Weather Insight, Itensity zone set for power, no itensity target set, Target: distance.

I rememered same type of interval on May 21st on Baro, press start, shows interval 1 on screen, then instead of going to interval screen goes back to start screen where shows start pointed at start button but it actually starts counting. If you just keep going it eventually returns to interval screen.

isazi

@lexterm77 I think this bug is already known, not sure if the issue is S+ now. I’ll check and get back to you.

Dimitrios Kanellopoulos

@lexterm77 could you try without s+?

lexterm77

@dimitrios-kanellopoulos

I can try without s+, on first interval is fine, it is when you reset interval and do a second one, and a third one. I can try again tonight on my easy trail run.

isazi

@lexterm77 so the issue should be the S+ now, and it is known to Suunto (so we hope in a fix).

lexterm77

@isazi

I tried same without S+ There were no problems this time.

bnorthrop

Question for anyone who has the titanium 9 Peak. The body of the watch is brushed titanium but the thin top rim around the watch face looks like polished titanium. I’ve now had my S9P for about 1.5 weeks and in just the past couple days I’ve noticed that one side of that top thin rim is scratched. It’s easy to tell the difference because the rest of the rim is very nicely polished.

What I’m not sure about is whether the watch actually came like this (like a manufacturing defect) and I simply didn’t notice until now, or whether the polished rim actually scratches pretty easy.

Have any of you with the titanium version noticed this polished rim getting scratched/scuffed already? Or is it likely that mine came this way any it was scuffed from the start? Thanks!

Brad_Olwin

@bnorthrop It does scratch easily, my test version was scratched quite a bit and so is the one I purchased. It doesn’t bother me much, they are not that easy to see.

bnorthrop

@brad_olwin Thanks for sharing your experience. I’m not that bothered as long as the screen doesn’t also scratch, which I suspect (or at least hope) won’t happen nearly as easily.

Plus, I assume at some point the thin polished rim will be scratched enough it’ll just match the brushed look of the sides of the case

Full review of ray
https://www.dcrainmaker.com/2021/07/suunto-9-peak-gps-watch-in-depth-review.html

@andré-faria I think this is the nicest Suunto review I’ve seen from Ray in the past 5 years I’ve been closely reading him.

Aleksander H

@nickk said in Suunto 9 Peak:

@andré-faria I think this is the nicest Suunto review I’ve seen from Ray in the past 5 years I’ve been closely reading him.

I think the Suunto Spartan Sport was the last one to get a review as positiv as this from him.

https://www.youtube.com/watch?v=BR6LH2JOwbM

Chase the summit also release his review.

Dimitrios Kanellopoulos

@andré-faria he uses qs

Another review, but in french, with an interesting comment!

Nolio for those who don’t know. Interesting!