Modify Ascend/descent values in app

TitoPaKa

@TELE-HO I have a suunto sports wrist, I don’t have barometer. I think that I might have a problem with the sport mode setting, but I not find the problem

freeheeler

@TitoPaKa
I see lowest and highest point difference… do you sync to SA directly?

TitoPaKa

yes i do!

freeheeler

@TitoPaKa
ok, this should be fine.
what sport mode did you use? could it be that it suppresses ascent? e.g. standup paddling by logic should not count ascents

TitoPaKa

No, I have configured a specific screen with ascent and descent and on another screen the highest and lowest point.
The weird is that really, it sends a data for the ascent and descent, the problem is that this data is 0.
I have to check the GPS quality settings

TitoPaKa

@TELE-HO I have imported the GPX to movecount (web) now, and it loads the values well.

freeheeler

@TitoPaKa
what version of SA are you running?

TitoPaKa

@TELE-HO sorry, I was driving. The version is 1.11.1 (7470)

freeheeler

@TitoPaKa
that’s iOS, what I saw in here SA for iOS normally is slightly better/stable
no clue, sorry…
maybe someone else knows better

TitoPaKa

@TELE-HO thank you for try to help me
I will try to change GPS configuration or I will wait the solution in the next update

suzzlo

Hi, what kind of sport are you using?

I found my SSSW (without baro) very inaccurate, when my ups and downs are very flat. There is other thread where Suunto algorithm is explained, and there must be more than 7m of difference in less that X time to modify value (sure it’s not exactly explained). Please try to find this algorithm an compare with your…

WAIT!!!
Elevation = 0 is just on SA, or in SA and watch?

TitoPaKa

0 value is in SA, I don’t know the value in he watch because in the diary not show this information. While I was running the watch not show asc/desc values.

freeheeler

@TitoPaKa
no entry in the logbook?

suzzlo

@TitoPaKa you should have resume in the log:

TitoPaKa

@TELE-HO I have data but haven’t Ascens/descend data values

@suzzlo in my log I can’t see the graph, but I have configúrate the graph in the sport mode.

suzzlo

@TitoPaKa you are mixing… Your watch will get data and store it, no matter if you have configured to show it or not.

So, once you finish your workout, you can see some basic data IN THE WATCH. Let’s see how to do it:

From main scree:

Up button to exercise
Up button to navigation
Up button to logbook
Middle button to enter in logbook
Up/down button till you find workout
Middle button to show details
Down button till you find ascend/descent

Compare this data with SA data, there are some options:

Ascent/descent = 0 in the watch -> problem in the watch
Ascent/descent bigger 0 in the watch and 0 in SA -> problem in SA

TitoPaKa

@suzzlo I haven’t this data in logbook,

Mff73

@TitoPaKa
Are you in Best GPS mode?
Afaik, without Baro, no altitude nor ascent are shown and saved in watches without Baro?

TitoPaKa

@Mff73 I think that could be the problem, I try to change some configuration and I will inform you of the result
without baro, if the rise and fall values are shown (With GPS), I have the problem, probably because I have something wrongly configured

TitoPaKa

Hi all! I try to change de GPS configuration and this was the problem, with high the values increase.

Problem resolved but I can’t change the values in my past workouts xD

Thanks for all!