Suunto ambit3 peak cant found gps signal for an hour. Did any tips to help ?

[Tang Chean Choong]

Yes…i tried aoft reset couple time , but still not received signal gps

[Saketo Nemo]

than, you synced via cable or mobile app?

[mario_b]

press back+lap for 12 seconds. -> Info -> GPS sgee look if the date is old. if so. sync the watch via usb-cable with the computer.
try searching gps under clear sky and point a antenna up. (the plastic bulk) without holding the antenna. should get a signal within around 5 minutes.

[Tang Chean Choong]

@Saketo-Nemo will try by later

[thailon]

@mario_b nothing is happening after 12 sec of holding that lap+back button on my Ambit3 Peak (last firmware installed)

[margusl]

@thailon , should have been 2 upper buttons, back/lap + start/stop
And under service menu there’s also Action -> GPS Reset , might be worth to try this as well.

[thailon]

@margusl thank you, this combination does work.

[mario_b]

@thailon sorry, my fault. @margusl said the right thing. (Forgot start) ‍️
Here you can see how old the gps infos are on your watch. If you sync over the cable gps position data will be updated. And you will find a quicker gps fix.

[thailon]

@mario_b @margusl thank you, I just wanted to know this combination. Just for information. Thbere is the other guy having a problem with connection.

[margusl]

@thailon said in Suunto ambit3 peak cant found gps signal for an hour. Did any tips to help ?:

I just wanted to know this combination. Just for information.

A3 user guide is quite complete and, among other bits that might not be too obvious, covers the service menu - https://www.suunto.com/Support/Product-support/suunto_ambit3_peak/suunto_ambit3_peak/features/service-menu/