Tide table on vertical 2
-
Is anyone else having trouble updating the data for the tide widget on the V2? Mine updated when I installed the new firmware this week but since then it has not updated. It says no data available. Syncing the watch to the app does nothing, nor does selecting update now in the widget itself. I have tried a soft reset and removing the widget from the watch then reinstalling it and it still does not update. I live less than a mile from the sea in Scotland.
Suunto Ambit3 peak
Suunto 9
Suunto Vertical 2
Suunto Wing 2
COROS HR monitor -
@MikeC30 the same here
-
@MikeC30 Exactly the same problem. I’m in Brittany next to the sea. After installation of the widget it was nicely updated. But now, it’s broken. I’ve tried everything : no update. I think there is a problem with the Tide server… No the V2
-
is working well on my side (iOS).
-
Alas, that does not work.
-
@MikeC30 you can try a couple of things: restart BT on watch and phone (Airplane mode off/on).
Force close and restart the app and tap “synchronize now” in the app. -
Hi, I didn’t do any special today and it’s working again. I can see the tide and the prediction. Very strange
I’m on IOS -
Widget working again today and I didn’t get a chance to try the things you suggested. Thanks for the advice.
I am on holiday in a different part of Scotland now so not sure if that has made a difference or not to the widget updating.
I am not sure exactly where Suunto gets its tide data from but my location only says Scotland in the widget and comparing the widget tide times to the nearest local port tide tables there is a significant difference in the timings of high/low tide and also the tide level.
-
@MikeC30 When I first tested this widget – quite far from the coast – it only showed the country name. But when I was near the beach and checked how it worked in practice, it showed more specific local locations instead.
-
@MikeC30 same here
-
@MikeC30 I’ve asked about this on another thread but so far there’s been no clarification. I’m 100metres from the sea near Arisaig and mine just says ‘Scotland’. I would very much like to know where the data is taken from - if it’s a tidal reference port it really needs to name that. I asked if the system was clever enough to calculate tides for the exact location but I stand to be corrected. I doubt this is possible due to local variations etc and in any case (sorry if you already know this) most calculations used for planning etc are based on times plus or minus reference ports so for practical purposes I think that would be better.
Comments were made in the other thread about other better sources for tidal info - I agree but I like having it on the watch as well and have found myself referring to it regularly. -
@MarkG in my experience I got “Italy” when far away from the sea, or various town names when closer. Tested it in Italy and the Netherlands. Maybe there is an issue with your specific location that I can report.
Watch: Suunto Vertical 2 Titanium Black
Blog: isazi's home
-
@isazi the best Option would be to make a actual poi in the suunto map in the App and from this point you will get the nearest Tide Infos. This Automatic Location is not good sometines!
-
I continue to have issues as well with the tide widget. I was on the west coast of Scotland beside the sea near Fort William at the start of the week and the widget started working again but still only gave my location as Scotland. I’m back on the east coast of Scotland again and the widget is not working. I am standing right beside the sea as I type this.
-
@MikeC30
It does not work for me either, I tried also the air plane mode, reset the app, restart the watch. I am 300m from the sea and it does not work.After last update also battery status is doing strange things. I was snorcheling and received 5% battery remaining warning. After ending sportmode the status was 10%
I recharged to 99%.
I was cycling for 1,5h and went swimming for 30min, it dropped to 90%, which is more than usual. After restart (as above) it changed to 93%.
️ -
@matus69 are you also in Scotland?
-
just to make sure:
You all have location permission for the app?
You have tapped the update now button in the widget
and you have synced the watch with SA afterwards? -
Yes. To all these questions. Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login