Altimeter
-
@freeheeler Dear,
thanks for the answer, in the image below it is the most striking, from 2065 meters in altitude, compared with a friend with another device at most 25 meters …
image url) -
@blenedfly direi che o l’altimetro è rotto, oppure c’è qualcosa che pompa aria sul sensore (i buchi che vedi di lato).
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi si penso anche io sia difettoso, avvolte pero’ sembra funzionare …
comunque se aggiungessero una sorta di taratura manuale il problema si risolverebbe (cosa che altri dispositivi hanno)
grazie per la risposta@isazi yes I also think I’m defective, but sometimes it seems to work …
however if they added some sort of manual calibration the problem would be solved (which other devices have)
Thanks for the reply -
@blenedfly
maybe next time you can pay attention if something is covering the sensor holes. the graph looks like something was pumping (as @isazi said). don’t wear the watch too tight.
in SA you can manually correct the total ascent to keep your annual statistics correct.
and before you press start, please make sure the green arrow is constant and not flashing anymore
keep us posted if this helps
-
@freeheeler said in Altimeter:
@blenedfly
maybe next time you can pay attention if something is covering the sensor holes. the graph looks like something was pumping (as @isazi said). don’t wear the watch too tight.
in SA you can manually correct the total ascent to keep your annual statistics correct.
and before you press start, please make sure the green arrow is constant and not flashing anymore
keep us posted if this helpsthere is nothing that pumps air now I will try to wear it slower. Before starting the activity I wait 4/6 minutes … I will keep you updated
-
@blenedfly Try starting an activity and leave the watch on the same spot for e.g. 30 minutes. If the altitude goes up and down more than a few meters there is something wrong.
You can also strap the watch e.g. to the top of a backpack and make sure that it hangs freely and open. Then take a little walk on a flat surface. If the altitude goes up and down more than a few meters there is something wrong. -
blenedfly Try starting an activity and leave the watch on the same spot for e.g. 30 minutes. If the altitude goes up and down more than a few meters there is something wrong.
You can also strap the watch e.g. to the top of a backpack and make sure that it hangs freely and open. Then take a little walk on a flat surface. If the altitude goes up and down more than a few meters there is something wrong.I’ll try’…
however, manual calibration would take -
@blenedfly no manual calibration will not be the solution here, because the problem is the spikes, not the initial altitude. And your S7 calibrates automatically.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
-
@blenedfly Hello friends,
today the second Suunto 7 arrived, immediately tried but the altimeter shows me an incorrect altitude (it seems to have no variations), or this model has some basic problems or Suunto does not want me as a customer
-
@blenedfly
I understand you wait some time after the green arrow is constant. we can exclude a wrong operation I guess.
Is it possible for you to upload some of your recorded activities to quantified-self.io, make them public and share the link here?
if you are concerned about privacy you can also send the link in private message. -
@blenedfly I have a large number of activities, tens to hundreds with the S7 and another Suunto (S9baro or S9Peak) all worn at the same time. The altimeter for me on the S7 has been excellent, I can show you some of the data if you wish. If @freeheeler cannot help you I will try. I still have an use my S7 without issues.
-
@brad_olwin
I can only check activities like running together with my wife, as she has an S7 in use, without alti issues.
the only issue she’s ever had with her S7 was wrong altitude when ahe started an activity before satellites were properly locked -
-
@blenedfly
to me this graph looks like the sensor holes have been covered, maybe on sweaty skin.
but it could be a faulty sensor, too. but my bet is, sensor hole covering. on the map it looks like this region is very flat.
let’s see what @Brad_Olwin thinks about it.
-
@freeheeler with the gps the height marks it correctly, the hole seems open to me …
-
@blenedfly
I know what you mean… but…
open:
close: (common position on the handlebar)
-
@freeheeler
I understand … I think I’ll give up suunto … the barometer even if I’m not wearing the watch shows -50 …
I bought 2 and they both have the same problem -
@blenedfly
I wouldn’t give up so soon if you like the watch in general.
the altitude is corrected by GPS frequently during an activity. if the last corrected altitude is going wrong again, because of covered holes and hence built artificial pressure (the alti goes doen then), it is likely that you check before it’s corrected again and it shows below sealevel.
It is also visible on the graph. I think no spot in your area is below -100m sealevel.Try a d dummy activity on your balkony, put the watch somewhere for 30min, leave it alone and observe what it is doing.
-
@freeheeler I’ll try … because I like the watch
