Let's talk about the "clickiness" of the digital crown button
-
@vjakub I have been using it for kite surfing. Still very clicky - but this is no guarantee.
-
@Egika
Iām jealous!!! -
My crown just stopped being clicky as before over the weekend. It became softer, almost non clicky, it is now hard to figure out is it pressed or not. I never shower with watch, go into water or anything similar.
-
Hi everyone,
SOLUTION!!!
I had the same problem and I tried all kind of solutions (cleaning, different oils, sprayingā¦)
The solution is specifically āWD40 white lithium greaseā spray. Crown is clicking like a first day!
I put WD few days ago and crown is still perfectly clicky.
I hope this will work for you as well. -
@Kristijan-MatuliÄ
Iām not really sure that lithium is the best option for a watch crown button, lithium grease is usually used for heavy duty or high speed component.
Iām afraid it will act as a dust trap in long termMaybe some gentle compressed air shot or just rinse it with luke warm water.
-
@Kristijan-MatuliÄ
I would be careful with lubrication, cleaning solvents and liquids in general in combination with sealing materials.
we donāt know the material composition of the watchās sealing and some content might damage seals -
Hi,
for two days I have noticed the same thing with the crown button but not every time I push it. Due to the fact that it isnāt anytime, it makes me think it might be caused by the larger size of the button. I mean, it might depend on which point you press.
-
@General_Witt so, thanks to some genius who showed me that my words for describing my ācrown button feelā actually lead to your post, I am here.
I got exactly the same issue. It started somewhere in December, my Race was about one month old.
Somehow the clickiness comes and goes for me, itās almost always there but sometimes it feels clicky again.
I personally hate the āsquishynessā and the missing tactile feel when it is in ābadā state.
Also, I somehow fear that even replacing the unit will lead to exactly the same situation sooner or later. And I would not like to be without the watch for more than a day.
What have you done since then? Any news?
-
@Olaf-Gottschalk I have experienced similarly. The clickyness sometimes is less to be felt. If I go swimming etc, it comes back.
That makes be think that some residue in the mechanism is damping it. And by flushing or cleaning it otherwise, it comes back.Since I donāt think it is a defect, but dirt, I am fine with this so far.
Using the wheel or the button makes the click come back. -
@Olaf-Gottschalk Same here. I can report that maybe the issue is warm enviroment, hand etc. In my case it often happens in the morning after the sleep, when watch is somehow warmed from body, etc. Never had this when mounted (on handlebar) on my MTB rides. My solution for the moment is gently push the crown with fingernail out. It seems that itās somehow stucked in press position. True that I didāt try to put some lubricant as some others did (WD40 silicone). Obviouslly itās a hardware issue, as reported from many users. Since the crown functionality is not the problem so far (only crisp clickness) Iāll live with that, until Suunto will officialy put solution, or even recall watches to service/replacement???
-
@Olaf-Gottschalk Do you really think that your post without the first sentence would be less informative, helpful or representative of your disapproval of the current"return and repair" Suunto policy?
-
@soisan why? Suunto should know how normal users feel about this, donāt you think?
Explain to me why I should suffer for any issue that I am not responsible for. āļø -
@Olaf-Gottschalk said in Let's talk about the "clickiness" of the digital crown button:
Suunto should know how normal users feel about this, donāt you think?
A normal user would discuss this matter with a little more respect towards Suunto and fellow community members.
-
@Olaf-Gottschalk said in Let's talk about the "clickiness" of the digital crown button:
so, thanks to some genius who showed me that my words for describing my ācrown button feelā actually lead to your post, I am here.
I was just referring to this sentence and not the rest of the post.
-
Suunto should know how normal users feel about this, donāt you think?
A normal user would discuss this matter with a little more respect towards Suunto and fellow community members.
I think respect for a company starts by great products that donāt give users problems and IF they do an outstanding service with the least impact to the user.
In what why my respect to other users is affected by criticism towards a company they also suffer from, I canāt see.
Unless your a real fanboy and donāt want to read anything badā¦ -
@Olaf-Gottschalk said in Let's talk about the "clickiness" of the digital crown button:
@General_Witt so, thanks to some genius who showed me that my words for describing my ācrown button feelā actually lead to your post.
I think I am this genius. Thanks for the compliment.
And congratulations, you entered into my very closed list of personal hidden users in this forum.
Donāt waste your time to answer me, I will not see anymore any of your messages. This user forum has this functionality for anyone peace of mind (use the search function to learn about it, if you are genious enough to understand how to use it).
Bye. -
@Olaf-Gottschalk said in Let's talk about the "clickiness" of the digital crown button:
towards a company they also suffer from
Iām not suffering at all
Snow is crystal the fire is cold I sit back watch the sun turn gold In the morning love is healing Warm the frost deep in my bones Snow is crystal Love is pure I look out see a hawk in flight The forest awaits me White - The Cult
-
@Olaf-Gottschalk It wasnāt your first post with disrespectful comments about other members of this forum or Finnish engineersā¦ There were enough mentions of these facts by other users which you choose to ignore. You insist instead to refer all the time to your right to criticise a company and your personal sufferings which result from the bad policies of this company. You also present yourself as one of the few responsible users that through criticism try to help Suunto improve its products and services.
Iām trying one last time to make myself clear and avoid any misunderstandings. Finding a problem, a bug, a mistake in respect to the function, design or quality of a product and writing about it, asking for corrections or suggesting possible improvements is what a big part of this forum is about. I read your findings, suggestions and remarks with great interest and although I donāt always agree with you, I appreciate your involvement and insights.
What I have a problem with is your tendency to get personal with and insult other users that donāt have the same opinion with you, share your suggestions or agree with your sentiments. I donāt mind reading that Suunto has a bad policy concerning returning and repairing defective products but I feel bad when somebody is called ironically āgeniusā because he dared to mention that there is already an earlier post about the same problem that you have with your watch! I really appreciate your insights about possible software shortcomings of the Race but I get angry when these insights lead to a collective disapproval (to put it mildly) of the professional adequacy of a whole nationā¦
Dear Olaf, nobody has a problem with your criticism or your opinions, itās the way you sometimes refer to other people that opens the door for bad feelings. As the Germans say, āder Ton macht die Musikā! -
@ppresing The rotating crown sometimes has less lift when I press it. I only can faintly feel the small moving when pressure on it. When I lift it up, I can again feel more movement when pushing, just like when I first used itā¦
Does anyone have such experiences?
My problem is the same and thanks for redirecting to this thread. I have never bathed or showered with the watch on, and it happens to me in the morning when I get up or during the day, as you also write. And a gentle pull out helps, then the clicking resumes. -
@General_Witt said in Let's talk about the "clickiness" of the digital crown button:
Has this happened to you as well?
SOLUTION 2.0
Began experiencing the same āsilentā or āsoftā click with my 6 month-old Race. Took a sterile, individually wrapped alcohol pad and slipped it in the open spaces around the crown to give good rub. The crown is again clicking as it did when new.
There was no visible debris or other markings on the alcohol pad after the cleaning, so Iām unsure what the issue may have been. Regardless, my Race now functions as expected.