Swimming pool
-
Swam twice with my SR, and like my SV, it is still quite disappointing. In fact it’s worse for my SR. After both my swim, my watch showed 0 distance, and after syncing , my app showed 1,120 meters. Then when uploaded to strava, distance was 1,079. Correct distance should be 1,000. Each lap is 40m. Anyone experienced the same ?
-
@leafs93 Did you calibrate the swimming pool length on your watch before starting the activity?
-
@Kostas-Zinelis calibrate as in indicate the pool length ? Yes I did.
-
@leafs93 Watch indicated 0 distance even though the app after sync was 1120 meters. I have calibrated the pool length to 40m per lap. The correct distance I swam should be 1000m or 25 laps. And the weird thing is strava when sync is an even more weird number of 1079. Nothing unusual about my swim motion as I was wearing my Garmin 965 and it had no trouble detecting the right distance of 1000m
!l
-
@leafs93 said in Swimming pool:
@leafs93 Watch indicated 0 distance even though the app after sync was 1120 meters. I have calibrated the pool length to 40m per lap. The correct distance I swam should be 1000m or 25 laps. And the weird thing is strava when sync is an even more weird number of 1079. Nothing unusual about my swim motion as I was wearing my Garmin 965 and it had no trouble detecting the right distance of 1000m
!l
What neon/flourescent yellow strap is that you are using in this photo?
-
@Joakim-Ågren just another 22mm strap I bought online… very similar to suunto 9 lime strap.
-
No swimmers here facing this issue of watch showing zero distance on lap pool? I was hoping the new firmware would fix this but it is still showing zero distance on my watch but when sync with app, the app would correctly show the distance . Anyone ?
-
@leafs93 said in Swimming pool:
No swimmers here facing this issue of watch showing zero distance on lap pool? I was hoping the new firmware would fix this but it is still showing zero distance on my watch but when sync with app, the app would correctly show the distance . Anyone ?
Unfortunately, the algorithm for counting pool lengths often fails. The conditions mentioned by other users on this forum to be met are not sufficient and you will either have to wait for an algorithm fix or a new watch. I myself am disappointed by this fact. In my case, the watch, SV, does not count all the lengths swum, at least 30%…
-
@Ars-Vitae I can understand if some laps are not counted. My issue is different as the laps are counted, just that they are not reflected on watch ( reflected as zero distance ) but on my Suunto App after syncing. Seems there ain’t many others with this issue though.
-
@leafs93 Indeed, that’s what you wrote, my fault for misreading. In that case I envy you, I would like to have at least such a problem, at least an accurate value in the Suunto App.
-
@leafs93 hi there; I’m new Suunto Race user. I have exactly same problem. watch says 0 mt. but apps says 2000mt. Traingpeaks sync says 2000mt. strava sync says 1999mt. today I updated to 2.30.38 version. I hope it fixed.
-
Of course, there are swimmers, but I rarely visit this forum because there is little interest in swimming problems.
Yes, I have the same problem, after finishing the activity I have “0” on the watch and after synchronization I have the full distance in the application.
Although I haven’t checked yet after the last update. Today I will test.
I swam with SA3P, S9BT and now with SV. It doesn’t add or reduce the length for me. Unless I stop in the swim lane or make unnecessary moves.
Generally, you can swim in a pool with Suunto watches, but you will not do advanced training.
-
@artusdiver glad to know I am not the only person facing this issue or it means mine is a hardware problem. Anyways I have raised this to support and they are aware and will hopefully get this fixed. I have not swam yet since the latest firmware update but I doubt this is in the fix . If any of you have with this same issue swam recently, please let me know. Thanks
-
@ahmetaktan yup, same as mine. Strava when sync will always not show a whole number but with a distance ending with 9.
-
@ahmetaktan I think it is just an issue of displaying distance in the summary instead of swimming distance, will report it.
Watch: Suunto Vertical Ti
Blog: isazi's home
-
-
@isazi thank you for your help
-
Vertical is also affected by the 0 distance bug in the summary screen during pool swim.
-
@herlas it’s funny that when I asked support if there are reported cases like this and they would just reply that they are not aware.
-
status update :)))) After updated to 2.30.38 os version, I tried to reset to factory settings but nothing changed :)))
